OpticalOnline Remote RX Ordering Instructions:Must Use Internet Explorer(firefox and other browsers not supported) These are the instructions to install the OpticalOnline Remote RX Ordering software. If you have any questions or problems with the instructions, please call 800.708.1736 or send us an e-mail.Hardware RequirementsWindows 2000, XP or Vista,Pentium 166 or faster,Minimum 48 Mb RAMIf you do not have all of the above, please do not proceed with the following instructions.Install the SoftwareEnsure you are connected to the Internet - the software will not work without an Internet connection.1. To navigate to the software installation page from our Home page left click the option under the Downloads tab called OpticalOnline Installation or click here2. Left click the link Launch OpticalOnline to install the software. This link will install the software and automatically update it each time it is restarted. Accept each step of the installation as presented including the license agreement. Do not make any changes.3. Once the installation is complete, the OpticalOnline software will automatically start.4. The software requires a Username and Password. When prompted either use the Username and Password provided by your lab or use the demonstration password: Username = 007015 and Password = test and left click the Login button.Para una demonstracón en español, use: Nombre de Usuario = 007006 y Contraseña = passwordPour une démonstration veuillez utiliser: Nom d'usager = 007005 and Mot de passe = password5. Enter a patient's name and select No Trace as the Trace File Option6. Continue to enter a complete Rx order.Demo Help:If you have any questions or would like help in setting up or using the demo, pleasedo not hesitate to call us at 800.708.1736 Monday to Friday between 8am - 6pm EST (GMT -5).